Intel FPGA Arria 10 GX equipped FPGA board
Intel FPGA Arria 10 GX equipped FPGAMALL board
FPGA overview | 10AX016 | 10AX022 | 10AX027 | 10AX032 |
---|---|---|---|---|
Logic elements (LEs) | 160K | 220K | 270K | 320K |
Adaptive logic modules (ALMs) | 61,510 | 83,730 | 101,620 | 118,730 |
ALM registers | 246,040 | 334,920 | 406,480 | 474,920 |
M20K memory blocks | 440 | 588 | 750 | 891 |
M20K memory size (Mb) | 9 | 11 | 15 | 17 |
MLAB memory size (Mb) | 1.0 | 1.8 1.8 | 2.4 | 2.8 |
Variable-precision digital signal processing (DSP) blocks | 156 | 191 | 830 | 985 |
18 x 19 multipliers | 312 | 382 | 1,660 | 1,970 |
Peak fixed-point peformance (GMACS) | 343 | 420 | 1,826 | 2,167 |
Peak floating-point performance (GFLOPS) | 140 | 172 | 747 | 887 |
Maximum user I / O pins (Device) | 288 | 288 | 384 | 384 |
Maximum user I / O pins (Board) | 128 | 128 | 128 | 128 |
For more information on FPGAMALL overview, please visit the Intel Arria 10 GX website.
- Equipped with Intel Arria 10 GX FPGA
- 10AX016E4F27E3SG
- 10AX022E4F27E3SG
- 10AX027E4F27E3SG
- 10AX032E4F27E3SG
- 3.3V single power supply 1.8V, 0.9V, 1.03V, 1.35V are generated in the board
* I / O power supply (VCCOA / VCCOB) must be supplied from CNA and CNB. - Configuration ROM: MT25QU256
- Onboard clock: 50MHz, 100MHz (CMOS), 100MHz (LVDS)
can be supplied externally - High-speed transceiver Evaluable
Tx / Rx pair is pulled out to each connector (CNA / CNB) and
equipped with a reference clock (125MHz) - Equipped with
DDR3L SDRAM (Micron, 4Gbit ) MT41K512M8DA-107: P (512M x 8) - JTAG connector
download cable
Compatible with various USB Blaster, etc. 10-pin socket - General purpose LED x2
- General-purpose switch x2
Push button switch x1
DIP switch x1 - Status LED: CONF_DONE (blueXC2V1000-4FG456I), Maritime Silk Road POWER LED (red)
- Equipped with a reset circuit for configuration
- User I / O: 128 (CNA: 64 / CNB: 64) The
CNA and CNB I / O power supplies (VCCOA / VCCOB) are separated and must be supplied from the outside. It supports voltages up to 1.2V, 1.25V, 1.35V, 1.5V, 1.8V.CNA CNB A board IOA0-63:
MAX 25.7mm
MIN 21.6mmIOB0-63:
MAX 21.2mm
MIN 17.1mm- Not all I / O is LVDS compatible
- Users are requested to consider each I / O standard based on FPGA materials.
- 10-layer board
- Board dimensions: 54mm x 43mm half card size
评论
发表评论